Suunto Watch X6HR User Manual

EN  
 
EN  
Suunto X6hr  
USER’S GUIDE  
 
TABLE OF CONTENTS  
ꢀ. General InformatIon......................................................................................5  
ꢀ.ꢀ. Care and maintenance..........................................................................5  
ꢀ.ꢀ.ꢀ. Care of the Suunto X6hr ..........................................................5  
ꢀ.ꢀ.ꢁ. Care of the transmitter Belt .....................................................6  
ꢀ.ꢁ. Water resistance..................................................................................6  
ꢀ.3. adjusting the Bracelet (Suunto X6hrt)..................................................7  
ꢀ.4. Battery replacement of the Suunto X6hr .............................................8  
ꢀ.5. Battery replacement of the transmitter Belt ......................................ꢀ  
ꢀ.6. after sales service...............................................................................ꢀꢁ  
ꢁ. HoW to USe YoUr SUUnto X6hr ...................................................................ꢀ3  
ꢁ.ꢀ. Display ...............................................................................................ꢀ3  
ꢁ.ꢀ.ꢀ. mode Symbols........................................................................ꢀ3  
ꢁ.ꢀ.ꢁ. function Symbols...................................................................ꢀ4  
ꢁ.ꢁ. Buttons ...............................................................................................ꢀ5  
ꢁ.ꢁ.ꢀ. Short and long Press.............................................................ꢀ5  
ꢁ.ꢁ.ꢁ. Start Button ............................................................................ꢀ5  
ꢁ.ꢁ.3. Stop/Cl Button .......................................................................ꢀ6  
ꢁ.ꢁ.4. Suunto Button.........................................................................ꢀ6  
ꢁ.ꢁ.5. arrow Buttons.........................................................................ꢀ7  
ꢁ.ꢁ.6. Button lock ............................................................................ꢀ7  
ꢁ.3. menus ...............................................................................................ꢀ8  
ꢁ.3.ꢀ. Basic menu Structure.............................................................ꢀ8  
ꢁ.3.ꢁ. navigating in menus...............................................................ꢀ8  
ꢁ.4. Heart rate monitor and transmitter Belt.............................................ꢀ9  
 
ꢁ.4.ꢀ. electromagnetic Interference .................................................ꢀ9  
ꢁ.4.ꢁ. Warnings .............................................................................................ꢀ9  
ꢁ.4.3. Use of the Suunto X6hr and transmitter Belt in  
a water environment...............................................................ꢁ0  
ꢁ.4.4. activating the Heart rate monitor ..........................................ꢁ0  
3. moDeS .................................................................................................................ꢁꢀ  
3.ꢀ. General Information ............................................................................ꢁꢀ  
3.ꢁ. time mode ..........................................................................................ꢁꢁ  
3.ꢁ.ꢀ. main Display...........................................................................ꢁꢁ  
3.ꢁ.ꢁ. alarm......................................................................................ꢁꢁ  
3.ꢁ.3. time........................................................................................ꢁ4  
3.ꢁ.4. Date........................................................................................ꢁ5  
3.ꢁ.5. General...................................................................................ꢁ6  
3.ꢁ.6. Units .......................................................................................ꢁ8  
3.3. Compass mode...................................................................................3ꢀ  
3.3.ꢀ. main Display...........................................................................3ꢀ  
3.3.ꢁ. Use.........................................................................................33  
3.3.3. altitude/Sealevel.....................................................................34  
3.3.4. Compass ................................................................................34  
3.4. Weather mode.....................................................................................37  
3.4.ꢀ. main Display...........................................................................37  
3.4.ꢁ. Use.........................................................................................38  
3.4.3. Sealevel..................................................................................38  
3.4.4. alarm......................................................................................38  
3.4.5. memory ..................................................................................39  
3.5. Hiking mode ........................................................................................40  
 
3
3.5.ꢀ. main Display...........................................................................40  
3.5.ꢁ. logbook ..............................................................................................4ꢀ  
3.5.3. Use.........................................................................................45  
3.5.4. altitude ...................................................................................45  
3.5.5. alarms ....................................................................................45  
3.6. Chrono ...............................................................................................47  
3.6.ꢀ. main Display...........................................................................47  
3.6.ꢁ. memory ..................................................................................48  
3.6.3. altitude ...................................................................................5ꢁ  
3.6.4. Use.........................................................................................5ꢁ  
3.6.5. timer ......................................................................................53  
3.6.6. Hr limits................................................................................54  
4. aDDItIonal featUreS .....................................................................................55  
4.ꢀ. PC Interface ........................................................................................55  
4.ꢀ.ꢀ. transferring Data....................................................................55  
4.ꢀ.ꢁ. Suunto activity manager features .........................................57  
4.ꢁ. SuuntoSports.com...............................................................................59  
4.ꢁ.ꢀ. System requirements............................................................59  
4.ꢁ.ꢁ. SuuntoSports.com Sections...................................................59  
4.ꢁ.3. Getting Started .......................................................................6ꢀ  
5. teCHnICal Data ................................................................................................6ꢁ  
6. CoPYrIGHt anD traDemark notICe...........................................................63  
7. Ce  
............................................................................................................64  
8. lImItS of lIaBIlItY anD ISo 900ꢀ ComPlIanCe ..........................................64  
9. DISPoSal of tHe DevICe................................................................................65  
 
4
1. GENERAL INFORmATION  
this User’s Guide applies to Suunto X6hr and its different design versions.  
Suunto X6hr Wristop Computer is a reliable high-precision electronic instrument  
intended for recreational use. outdoor enthusiasts and endurance athletes who enjoy  
such sports as mountain climbing, running and biking can rely on Suunto X6hr’s  
accuracy.  
NOTE: The Suunto X6hr should not be substituted for obtaining measurements that  
require professional or industrial precision and should not be used to obtain altitude  
or barometric measurements when flying a small aircraft or when practising aviation  
sports.  
1.1. CARE AND mAINTENANCE  
1.1.1. Care of Suunto X6hr  
only perform the procedures described in this manual. never attempt to disassemble  
or service your Suunto X6hr. Protect your Suunto X6hr from shocks, extreme heat and  
prolonged exposure to direct sunlight. If not in use, store your Suunto X6hr in a clean,  
dry environment at room temperature.  
Suunto X6hr can be wiped clean with a lightly moistened (warm water) cloth.  
If there are stubborn stains or marks, you can apply mild soap to the area. Do not  
expose Suunto X6hr to strong chemicals such as gasoline, cleaning solvents, acetone,  
alcohol, insect repellents, adhesives and paint, as they may damage the unit’s seals,  
case and finish. keep the PC interface contacts clean with e.g. a toothbrush. make  
sure the area around the sensor is free of dirt and sand. never insert any objects into  
the sensor openings.  
 
5
1.1.2. Care of Transmitter Belt  
Wash the transmitter with mild soap and water after each use. rinse with pure water;  
dry thoroughly and carefully.  
Store in a cool dry place. never store the transmitter wet. moisture keeps the electrodes  
wet and transmitter activated, thereby shortening the life of the battery.  
Do not bend or stretch the transmitter as this may damage the electrodes.  
1.2. WATER RESISTANCE  
Suunto X6hr and the transmitter belt are tested with ISo (International organization for  
standardization) standard ꢁꢁ8ꢀ (www.iso.ch). this means that product is water-resistant.  
“In addition to the term “water resistant” Suunto X6hr is marked with an indication of a  
test overpressure given as a depth in meters (ꢀ00 m / 330 ft) and transmitter belt (ꢁ0m  
/ 66 ft). this indication however do not correspond to a diving depth but refer to the  
pressure at which the water overpressure test was conducted”.  
this means that you can not dive to a depth of ꢀ00 meter / 330 ft with Suunto X6hr  
wristop computer nor ꢁ0m / 66 ft with transmitter belt.  
rain, shower, swimming and other normal exposure to water will not effect its operation  
but the buttons shall not be pressed if exposed to water in any circumstances.  
NOTE! X6hr wristop computers and transmitter belts must not be used for diving.  
 
6
1.3. ADJUSTING THE BRACELET  
(SUUNTO X6hrt)  
the metal/elastomer bracelets of the Suunto X6hrt  
have to be adjusted for the user. the steps are  
ꢀ. remove the buckle by releasing the spring bars  
with pin, paper clip or other sharp object.  
ꢁ. remove both spring bars from the pin holes.  
3. Shorten the bracelet by cutting along the grooves  
on the inner surface of the bracelet. You can do  
this for instance with scissors. If you are unsure  
of the correct length, cut the pieces one by one  
and test the length after cutting each piece. Cut  
in turns from both sides of the bracelet to keep  
the sides equally long. Be careful in order not to  
shorten the bracelet too much.  
4. replace the spring bars into the last pin holes  
of both sides of the bracelet.  
5. attach the buckle to the bracelet by placing the  
spring bars into the holes in the buckle. In both  
sides of the buckle are holes for two different  
positions. this can be used for fine adjusting of  
the bracelet length. make sure that the spring  
bars are positioned straight in the buckle.  
 
7
1.4. BATTERY REPLACEmENT  
Suunto X6Hr operates on a 3-volt lithium cell, type: Cr ꢁ03ꢁ. the life expectancy is  
approximately ꢀꢁ months in time/Weather modes.  
a low-battery warning indicator is activated on the display when approximately 5–ꢀ5  
percent of the battery capacity is still available. When this occurs, you should replace  
the battery. However, extremely cold weather may activate the low battery warning  
indicator, even though the battery is still fully operational. If the battery warning indicator  
is activated in temperatures above ꢀ0°C (50°f), replace the battery.  
NOTE: Heavy use of the backlight, altimeter, compass and heart rate monitor will  
significantly reduce battery life.  
You can replace the batteries yourself as long as you do it properly to avoid any  
leakage of water into the battery compartment or computer. always use original battery  
replacement kits. (they include a new battery, battery lid and o-ring.) You can purchase  
the battery kits from official Suunto retailers.  
NOTE: When replacing the battery, also replace the battery lid and O-ring. Never use  
the old ones.  
NOTE: Change the battery at your own risk. Suunto recommends you to have the  
batteries changed in official Suunto services.  
 
8
REPLACING THE BATTERY  
make sure that you have purchased an original Suunto battery kit (including battery and  
battery lid with installed o-ring) before you start replacing the battery.  
ꢀ. Insert a coin into the slot or a Suunto battery-opening coin into the slot or holes located  
in the battery compartment cover on the backside of your device.  
ꢁ. turn the coin counterclockwise until it is aligned with the open position marker. then,  
turn and lift the cover with the coin simultaneously, until the cover opens.  
 
9
3. remove the battery compartment cover and the old battery carefully.avoid damaging  
the contact plate.  
4. Carefully clean the inside sealing surface of the battery compartment before placing  
your new battery in the compartment.  
5. Place the new battery into the battery compartment with the positive side facing up.  
Gently slide the battery underneath the contact plate, ensuring that the contact plate  
does not break or bend out of place.  
6. Place the new battery compartment cover on top of the battery compartment, aligning  
the position marker on the cover with the open position marker on the backside of  
your device.  
7. Using the coin, gently press and turn the cover clockwise, until the position marker  
on the cover is aligned with the close position marker on the back.  
NOTE: When the battery has been replaced, ensure that the battery compartment is  
correctly closed. This helps your Suunto device remain water-resistant. Careless battery  
replacement may void the warranty.  
NOTE: Heavy use of the backlight, especially in the Night Use setting, will significantly  
reduce battery life.  
 
ꢀ0  
1.5. BATTERY REPLACEmENT OF THE TRANSmITTER BELT  
the transmitter belt operates on a 3-volt lithium cell, type: Cr ꢁ03ꢁ.  
the transmitter belt’s average expected battery life is 300 hours of use in ideal operating  
temperatures.  
When Suunto X6hr is not receiving a signal but the transmitter belt is active, a change  
of battery might be necessary. refer to chapter ꢁ.4.ꢀ. for other factors that may interfere  
with the correct signal.  
to change the battery:  
ꢀ. Insert a coin into the slot located on the battery compartment cover on the backside  
of the transmitter belt.  
ꢁ. turn the coin counterclockwise until it is aligned with the open position marker, or  
even slightly further for easy opening.  
3. remove the battery compartment cover. ensure that the O-ring and all surfaces are  
clean and dry. Do not stretch the O-ring.  
4. Carefully remove the old battery.  
5. Place the new battery into the battery compartment with the positive side facing  
up.  
 
ꢀꢀ  
6. With the O-ring in the correct position, replace the battery compartment cover and  
turn it with a coin clockwise until it is aligned with the closed position marker.  
NOTE: You should change the battery cover and the O-ring simultaneously with the  
battery to ensure that the transmitter remains clean and waterresistant. Replacement  
covers are available with replacement batteries.  
NOTE: Battery covers of the transmitter belt and the wristop computer are not  
interchangeable.  
1.6. AFTER SALES SERvICE  
If a claim under warranty appears to be necessary, return the product, freight prepaid,  
to your Suunto dealer who is responsible for having your product repaired. Include your  
name and address, proof of purchase and/or service registration card, as required in  
your country. the claim will be honored and the product repaired or replaced at no  
charge and returned in what your Suunto dealer determines a reasonable amount of  
time, provided all necessary parts are in stock. all repairs made, not covered under  
the terms of this warranty, will be made at the owner’s expense. this warranty is non-  
transferable from the original owner.  
If it is not possible to contact your Suunto dealer, contact your local Suunto distributor  
for further information. You can locate your local Suunto distributor from www.suunto.  
com.  
 
ꢀꢁ  
2. HOW TO USE YOUR SUUNTO  
X6hr  
2.1. DISPLAY  
When your Suunto X6hr leaves the factory, it  
is in sleep mode, with the display empty. long  
press (> ꢁ s) any button to activate the Suunto  
X6hr. the text defrag of memoryis displayed  
and after a few seconds the time mode is  
activated. later on, you can select which mode  
is displayed. for information about setting the  
correct time, refer to chapter 3.ꢁ.3.  
In addition to mode-specific information,  
the Suunto X6hr display includes several  
symbols.  
2.1.1. mode Symbols  
the mode symbols on the left of the display  
indicate the active mode:  
time  
Compass  
Weather  
Hiking  
Chrono  
 
ꢀ3  
2.1.2. Function Symbols  
function symbols indicate that either a function (such as alarm) has been activated or  
something needs to be done (battery symbol). the function symbols are:  
alarm  
active, when at least one of the alarms is on.  
Weather/altitude/Hr alarm  
active, when weather alarm, altitude alarm, asc/dsc alarm or Hr limits alarm is on.  
logbook  
active, when the hiking logbook is recording data.  
Chrono  
active, when the chrono is on and recording data to a file.  
Use alti/baro  
Indicates that the air pressure sensor is used as a barometer and the altitude reading  
is fixed.  
active when you select the air pressure to be displayed as weather information. In this  
case the altitude reading in Hiking, Chrono and Compass modes is fixed. for more  
information refer to chapter 3.3.ꢁ.  
Battery  
active, when 5–ꢀ5 percent of the battery capacity is left and the battery should be  
replaced.  
Button lock  
active, when the button lock is activated.  
 
ꢀ4  
Heart rate  
active, when the heart rate monitor is receiving heart rate signal. flashes in sync with  
the heart rate.  
2.2. BUTTONS  
2.2.1. Short and Long Press  
the buttons may have different functions  
depending on how long you press them.  
the ordinary press or short press means that  
the button is pressed quickly.  
the long press means that the button is pressed  
for more than ꢁ seconds.  
2.2.2. Start Button  
Short press  
• In Chrono mode, it starts timing and saves and displays the intermediate times.  
• In Hiking mode, it saves the mark points (altitude, heart rate and time).  
Long press  
• activates the backlight when the backlight is not set to the off position. for more  
information on backlight settings, refer to chapter 3.ꢁ.5.  
 
ꢀ5  
2.2.3. Stop/CL Button  
Short press  
• returns to the previous menu level or to the previous selection without accepting  
the selection.  
• In the Chrono mode, it stops timing.  
• In the main displays, it acts as a shortcut button that toggles the lowest field of the  
main display between three different alternatives. the selection stays active even if  
the mode or menu level is changed.  
Long press  
• returns to the main display of the current mode without accepting the last  
selection.  
• In the Chrono mode, it resets the stopwatch.  
2.2.4. Suunto Button  
Short press  
• Scrolls to a lower menu level.  
• accepts the selections made with arrows and moves to the next phase.  
• after the last selection, it returns to the Set menu.  
• With two possible selections (e.g. light on/off), it activates the selection and accepts  
the selections made with arrows.  
Long press  
• returns to the main display of the current mode and accepts the selection.  
• With two possible selections (e.g. light on/off), it accepts the selection and returns  
directly to the main display of the current mode.  
 
ꢀ6  
• In the main display of all modes, it activates or deactivates the heart rate limits  
alarm.  
2.2.5. Arrow Buttons  
Short press  
• Scrolls from one mode to another.  
• Scrolls the menus up and down, and logbook and memory forward and back.  
• Changes the values. the up arrow increases the value and the down arrow decreases  
the value.  
• With two possible selections (e.g. light on/off), both arrows change the value.  
2.2.6. Button Lock  
the button lock prevents you from pushing the buttons. If the button lock is activated  
and you try to press a button, the message unlock press suunto” is displayed.  
Activating the button lock  
to activate the button lock  
ꢀ. Press Suunto. Suunto X6hr switches to the function menu.  
ꢁ. Press Start within ꢁ seconds. the buttons are locked and Suunto X6hr switches to  
the main display of the current mode.  
Deactivating the button lock  
to deactivate the button lock  
ꢀ. Press Suunto. the following text is displayed: “now press start”.  
ꢁ. Press Start within ꢁ seconds.  
 
ꢀ7  
2.3. mENUS  
2.3.1. Basic menu Structure  
the menus are organized hierarchically under the modes. When you select a mode,  
its main display appears. When you press Suunto in the mode’s main display, the  
mode’s Function menu is displayed. the function menu includes several functions  
and all the functions include sub-functions or settings. this is called the hierarchical  
menu structure.  
2.3.2. Navigating in menus  
You can scroll the menu items with the up and down arrow buttons on the right side of  
Suunto X6hr. three menu items are displayed at the same time. the menu item that  
is currently active and can thus be selected is displayed in reversed color. on the right  
side of the display there is an indicator bar showing the total number of menu items.  
the number of the active menu item is displayed next to the indicator bar.  
to move deeper into the hierarchy, select a menu item and press Suunto. to return  
one step up in the hierarchy, press Stop/CL. remember that if you just press Stop/CL,  
changes are not saved. first you have to accept them with the Suunto button.  
If you want to return directly to the main display of the active mode, press either Suunto  
(saves the changes) or Stop/CL (discards the last change) for more than ꢁ seconds.  
Suunto X6hr has been designed to guide you as much as possible when you navigate in  
the menus. When you perform a function, Suunto X6hr often automatically returns to the  
menu that you are likely to use next. also, for example, if you try to do something that is  
impossible, Suunto X6hr first displays a message and then automatically recommends  
a function in reversed color to help you use the functions.  
 
ꢀ8  
2.4. HEART RATE mONITOR AND TRANSmITTER BELT  
the heart rate monitor is the premier feature of Suunto X6hr. It provides you with a  
versatile instrument for measuring and analyzing physical performance in different  
conditions. When used in conjunction with the altimeter function, the heart rate  
monitor allows you to observe changes in heart rate during ascents and descents and  
the impact of altitude on heart rate. the heart rates can be recorded in Suunto X6hr  
memory and transferred to a PC for analysis. the heart rate data is available in Hiking  
and Chrono modes.  
2.4.1. Electromagnetic interference  
Disturbances may occur near high voltage power lines, traffic lights, overhead lines of  
electric railways, electric bus lines or trams, televisions, car motors, bike computers,  
some motor driven exercise equipment, cellular phones or when you walk through  
electric security gates.  
It is best to position the Wristop computer within 3 feet (0,9 meters) of the transmitter.  
ensure that no other transmitters are within that range; signals from other transmitter(s)  
can cause an incorrect readout.  
repeated kinetic shock to the Suunto X6hr may cause an incorrect heart rate readout  
and should be avoided.  
2.4.2. Warnings  
Persons who have a pacemaker, defibrillator, or other implanted electronic device  
use the heart rate monitor at their own risk. Before starting the initial use of the heart  
rate monitor, we recommend an exercise test under a doctor’s supervision. this will  
ensure the safety and reliability of the pacemaker and the heart rate monitor when  
used simultaneously.  
 
ꢀ9  
exercise may include some risk, especially for those who have been sedentary. We  
strongly advise consulting your doctor prior to beginning a regular exercise program.  
2.4.3. Use of Suunto X6hr and Transmitter Belt in water  
Heart rate measurement in water is technically demanding for the following reasons:  
• Pool water with a high chlorine content and seawater may be very conductive and the  
electrodes of the transmitter may get temporarily short-circuited and the transmitter  
unit cannot detect eCG (=electrocardiogram).  
• Jumping into the water or strenuous muscle movement during competitive swimming  
may cause water resistance that shifts the transmitter on the body to a location where  
it cannot pick up the eCG signal.  
• the eCG signal strength varies depending on the individual’s tissue composition.  
People have more problems with heart rate measurement in water than  
elsewhere.  
2.4.4. Activating the Heart rate monitor  
to activate the heart rate monitor:  
ꢀ. attach the transmitter to the elastic strap.  
ꢁ. adjust the strap length to fit snugly and comfortably. Secure the strap around your  
chest, below the chest muscles. lock the buckle.  
3. raise the transmitter a little off your chest and wet the grooved electrode areas  
on the backside. It is important that these electrodes are wet during the exercise.  
4. Check that the wet electrode areas are firmly against your skin and the logo is in a  
central upright position.  
5. Wear the Suunto X6hr as you would wear an ordinary watch.  
6. Go to the Chrono mode and wait until the heart rate reading appears on the bottom  
 
ꢁ0  
row. alternatively, go to the Hiking mode, select the heart rate/time short cut on the  
bottom row and wait for the heart rate reading to appear.  
7. to start recording the heart rate in Chrono mode, press start when the Hr reading  
is shown.  
NOTE: You should wear the transmitter against your bare skin to ensure flawless  
operation. However, if you wish to wear the transmitter over a shirt, moisten the shirt  
well under the electrodes.  
3. mODES  
3.1. GENERAL INFORmATION  
Suunto X6hr has five modes: time, Compass, Weather, Hiking and Chrono. Heart  
rate is displayed in the Hiking and Chrono modes. the symbols for each mode are  
displayed on the left of the Suunto X6hr display. When you select a mode, the active  
mode indicator appears on the display next to the symbol of the selected mode. If the  
icons are set to on, they also display the active mode.  
to select a mode, press either the up or down arrow while in the main display of any  
mode and scroll the modes. During scrolling, the icon of the selected mode and its  
name appear on the display. When you stop scrolling, the icon stays for a little while  
and then the main display of that mode opens automatically.  
NOTE: In addition to the active mode indicator, the Use indicator can also be displayed  
next to the Compass or Weather mode symbols. If the Use is set to Alti, the indicator  
is next to the Compass mode symbol and if the Use is set to Baro, the indicator is next  
to the Weather mode symbol. For more information about the Alti or Baro Use, refer  
to chapter 3.3.2.  
 
ꢁꢀ  
3.2. TImE mODE  
3.2.1. main Display  
When you select the time mode, the main display opens. the main display has three  
rows:  
Date  
the first row displays the date in the selected format. for more information about  
changing the date format, refer to chapter 3.ꢁ.6.  
Time  
the second row displays the time in the selected format. for more information about  
changing between ꢀꢁ- and ꢁ4-hour display, refer to chapter 3.ꢁ.6.  
Shortcuts  
the third row displays alternatively the weekday, seconds or dual time. to change the  
displayed information, press Stop/CL.  
Weekday: Displays the current weekday.  
Seconds: Displays seconds.  
Dual time: Displays the dual time.  
3.2.2. Alarm  
You can set three independent alarms. In addition to the time, you can define the date  
when the alarm sounds. If you do not define the date, the alarm will sound daily, as  
long as it is set to on.  
When the alarm is set, the alarm symbol appears on the Suunto X6hr display.  
 
ꢁꢁ  
Activating alarms  
to activate an alarm:  
ꢀ. In the function menu, Alarm is already the first menu item. Select it by pressing  
Suunto. the alarm menu displays the status of the alarms. When you open the menu  
for the first time, the alarm indicators are set to off as a default.  
ꢁ. Scroll to the alarm you want to set and press Suunto. the alarm information is  
displayed and the on/off indicator is activated. When you open the alarm information  
for the first time, the time is 00:00 or ꢀꢁ:00 am.  
3. Press either the up or down arrow to change the alarm status to on.  
4. Press Suunto. the alarm symbol appears on the display and the hour selection is  
activated.  
5. Set the correct hour with the arrow buttons and press Suunto. the minute selection  
is activated.  
6. Set the correct minutes with the arrow buttons and press Suunto.  
7. If you want the alarm to sound every day, accept the dd.mm format by pressing  
Suunto. (a long press takes you back to the main display, two short presses first  
activate the mm field and then take you to the function menu.) the alarm is set to  
sound every day and you return to the function menu.  
8. If you want to set the alarm for a specific date, set the day and month in the dd  
and mm fields with the arrow buttons and accept the date by pressing Suunto.  
the alarm is set to sound only once on the selected date and you return to the function  
menu. to set the alarm back to daily function, activate the mm field and set its value  
back to mm with the arrow buttons. accept the setting with Suunto.  
 
ꢁ3  
Deactivating alarms  
to deactivate an alarm:  
ꢀ. In the function menu, scroll to Alarm and press Suunto.  
ꢁ. Scroll to the alarm you want to set off and press Suunto. the alarm information is  
displayed and the on/off indicator is activated.  
3. Press either the up or down button to change the alarm status to off and press Suunto.  
the alarm symbol disappears from the display.  
Acknowledging alarms  
When you hear the alarm, you can acknowledge it by pressing any of the Suunto X6hr  
buttons. the alarm stops automatically after 30 seconds.  
3.2.3. Time  
the current time is visible on the second row of the time mode´s main display.  
Dual time allows you to keep track of another time, for example, another time zone  
when you are traveling. the dual time is displayed on the third row of the time mode  
is main display as a shortcut. to scroll to the dual time shortcut, press Stop/CL in the  
main display.  
Setting the time and the dual time  
to set the time and the dual time:  
ꢀ. In the function menu scroll to Time and press Suunto. the menu with the options  
Time and Dual time is displayed.  
ꢁ. Scroll to either Time or Dual time and press Suunto. the hour selection is  
activated.  
3. Change the hour with the arrow buttons and press Suunto. the minute selection is  
activated.  
 
ꢁ4  
4. Change the minutes with the arrow buttons and press Suunto. the second selection  
is activated.  
5. When you press the arrow down button, the seconds are zeroed. If you want to set  
specific seconds, press the arrow up button and the seconds start running.  
6. When the seconds setting is correct, press Suunto. You automatically return to the  
function menu.  
NOTE: If the time is displayed as a 12-hour clock, the symbol AM or PM is displayed on  
the last row. For more information about the 12/24-hour clock, refer to chapter 3.2.6.  
NOTE: When you set the seconds for time, they are automatically updated in the dual  
time as well.  
NOTE: When you are setting the dual time, you can only set hours and minutes, the  
seconds are retrieved from the Time option.  
3.2.4. Date  
the date has three different formats: dd.mm, mm.dd or day. for more information about  
changing the format, refer to chapter 3.ꢁ.6.  
Changing the date  
to change the date:  
ꢀ. In the function menu, scroll to Date and press Suunto. the day field is activated.  
ꢁ. Change the value of the day field with the arrow buttons and press Suunto.  
the month field is activated.  
3. Change the value of the month field with the arrow buttons and press Suunto.  
the year field is activated.  
4. Change the year with the arrow buttons and press Suunto. (all the years mean the  
ꢁꢀst century.) You automatically return to the function menu.  
 
ꢁ5  
NOTE: The weekday is updated automatically on the third row according to the set  
date.  
3.2.5. General  
the General function includes the general settings for using your Suunto X6hr.  
Setting the tones  
tones are the sounds that indicate that you have successfully pressed the buttons.  
the tones can be set on or off.  
to set the tones:  
ꢀ. In the function menu, scroll to General and press Suunto. the General menu is  
displayed.  
ꢁ. Scroll to Tones and press Suunto. the on/off field is activated.  
3. Change the value of the field to either on or off with the arrow buttons and press  
Suunto. the tones are now set.  
Setting the icons  
Icons are the symbols that appear for a moment when you change the mode. You can  
either show or hide them.  
to set the icons:  
ꢀ. In the function menu, scroll to General and press Suunto. the General menu is  
displayed.  
ꢁ. Scroll to Icons and press Suunto. the on/off field is activated.  
3. Change the value of the field to either on or off with the arrow buttons and press  
Suunto. the icons are now set.  
 
ꢁ6  
Setting the backlight  
light is the backlight of the Suunto X6hr display. light has three possible settings:  
Normal: the light goes on when you press Start for more than ꢁ seconds in any  
other mode than the Chrono mode. the light is on for 5 seconds after the last press  
of any button.  
NOTE: If the backlight setting is normal and you press Start in Chrono mode, the  
Chrono is activated. If you want to use the light in the Chrono mode, you have to set  
the backlight to Night Use.  
Off: the light does not go on from any button or during an alarm.  
Night Use: the light goes on when you press any of the buttons and stays on for 5  
seconds after the last press of a button.  
NOTE: The backlight goes on when an alarm sounds in Normal and Night Use.  
NOTE: When the backlight is on, the heart rate reception is interrupted.  
to change the light setting:  
ꢀ. In the function menu, scroll to General and press Suunto. the General menu is  
displayed.  
ꢁ. Scroll to Light and press Suunto. the current light setting is activated.  
3. Select the light setting with the arrow buttons and press Suunto. the light setting is  
set and you return to the function menu.  
Calibrating the air pressure sensor  
the pressure sensor of the Suunto X6hr is accurately calibrated when the product  
leaves the factory. However, the calibration can slightly shift over time. You can adjust  
the calibration offset but you should only do it if you notice that the current air pressure  
shown on the bottom row in the Weather mode differs from a reference value of the  
 
ꢁ7  
barometric pressure measured with a certificated high-accuracy barometer. You can  
set the value by 0,ꢀ hPa or 0,0ꢀ inHg steps. the reference value should be measured  
with at least the same accuracy. If you are uncertain, contact the Suunto technical  
service before changing the calibration.  
to change the pressure sensor calibration:  
ꢀ. In the function menu, scroll to General and press Suunto. the General menu is  
displayed.  
ꢁ. Scroll to Sensor and press Suunto. the text sensor calibration appears and the  
current measured absolute air pressure is displayed as active.  
3. With the arrow buttons, set the absolute air pressure value to match the measured  
reference value and press Suunto. You return to the function menu.  
NOTE: You can return the original calibration by scrolling the sensor calibration value  
until text DEFAULT is displayed in the middle row.  
3.2.6. Units  
the units menu includes the units that are used with all the Suunto X6hr functions  
and settings. the unit settings affect the way information is displayed in all the Suunto  
X6hr modes.  
Setting the time format  
the time setting defines whether the ꢀꢁ- or ꢁ4-hour display is used.  
to change the ꢀꢁ/ꢁ4-hour display:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Time and press Suunto. the ꢀꢁ/ꢁ4 h field is activated.  
 
ꢁ8  
3. Select the correct setting with the arrow buttons and press Suunto. the time display  
is set.  
Setting the date format  
the Date setting defines the format in which the date is displayed. the possible formats  
are:  
DD.mm: Day before the month, e.g. ꢁ7.ꢀꢀ.  
mm.DD: month before the day, e.g. ꢀꢀ.ꢁ7.  
Day: only the day is displayed, e.g. ꢁ7.  
to change the date format:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Date and press Suunto.  
3. Select the correct date format with the arrow buttons and press Suunto.  
the format is set and you return to the function menu.  
Setting the temperature unit  
the temp setting defines the unit in which the temperature is displayed. the options  
are Celsius (°C) and fahrenheit (°f).  
to change the temperature unit:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Temp and press Suunto. the temperature unit field is activated.  
3. Select the unit with the arrow buttons and press Suunto. the temperature unit is  
set.  
 
ꢁ9  
Setting the air pressure unit  
the Pres setting defines the unit in which the air pressure is displayed. the options  
are hPa and inHg.  
to change the pressure unit:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Pres and press Suunto. the air pressure unit field is activated.  
3. Select the correct unit with the arrow buttons and press Suunto. the unit of the air  
pressure is set.  
Setting the elevation unit  
the elev setting defines the unit in which the elevation is displayed. the options are  
meters (m) and feet (ft).  
to change the elevation unit:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Elev and press Suunto. the elevation unit field is activated.  
3. Select the correct unit with the arrow buttons and press Suunto. the unit of the  
elevation is set.  
Setting the ascent/descent rate unit  
the Asc/Dsc setting defines the way the ascent or descent rate is displayed.  
the possible formats are:  
m/s  
m/min  
 
30  
m/h  
ft/s  
ft/min  
ft/h  
to change the asc/Dsc format:  
ꢀ. In the function menu, scroll to Units and press Suunto. the Units menu is  
displayed.  
ꢁ. Scroll to Asc/Dsc and press Suunto.  
3. Select the correct format with the arrow buttons and press Suunto. the format is set  
and you return to the Units menu.  
3.3. COmPASS mODE  
NOTE: Heart rate reception is interrupted when you are using the compass mode.  
3.3.1. main Display  
When you select the Compass mode, the main display opens. the main display has  
three rows.  
Bearing  
first row displays the bearing pointed with the sighting marks of Suunto X6hr.  
the bearing is displayed in bold when the compass is level. level position is needed  
to ensure accurate bearings.  
Compass  
the second row displays the heading of Suunto X6hr as a graphical presentation of a  
compass rose. the rose displays the cardinal and half-cardinal points.  
 
3ꢀ  
the magnetic sensor of the compass functions for 40 seconds at a time. after this  
period the compass moves into power-saving mode and the message start compass”  
is displayed. Press Start to activate the compass again.  
Shortcuts  
the third row contains shortcuts to three functions. to change the function, press  
Stop/CL.  
Altitude: In Alti use, it displays the current altitude, and in Baro use, it displays the  
reference altitude. for more information about the alti and Baro uses, see section  
3.3.ꢁ.  
Bearing tracking: Bearing tracking helps you to follow a certain bearing in terrain.  
When you scroll to bearing tracking for the first time, it is 0°. to activate the search  
for bearing, move your Suunto X6hr horizontally until the chosen bearing is displayed  
on the first row and press Start. the selected bearing is displayed on the third row  
until you select a new bearing with the Start button. When you have selected the  
bearing tracking, the compass rose in the middle row displays a dotted vertical line  
indicating the bearing tracking set.  
NOTE: The tracking remembers the last direction selected the next time you scroll  
to it.  
Time: Displays the current time.  
NOTE: The shortcuts also function normally in the power-saving mode. When you select  
the bearing tracking shortcut, the compass is automatically activated.  
 
3ꢁ  
3.3.2. Use  
With the Use function you can define whether the air pressure measurement is used  
to measure the altitude or to represent the weather conditions.  
If you select Alti (altimeter), the measured air pressure is displayed as altitude and all  
changes in atmospheric pressure are interpreted as changes in altitude.  
When the Alti use is selected, the altitude reading of Compass, Hiking and Chrono  
modes changes, but the atmospheric pressure (sea level) in the second row of the  
Weather mode remains constant. the absolute pressure changes if it is selected as a  
shortcut on the third row of the Weather mode.  
If you select Baro (barometer), the measured air pressure is displayed as weather  
information and all changes in atmospheric pressure are interpreted as being due to  
a change in the weather.  
When Baro is selected, the altitude reading in the Compass, Hiking and Chrono modes  
remains constant. the atmospheric pressure (sea level and absolute) in the Weather  
mode changes.  
Select the correct use according to what you want to measure. for example, on a hiking  
trip, you can select Alti for the day to see how high you have climbed. When you camp  
for the night, you can change the use to Baro to make sure that the weather changes  
do not catch you by surprise.  
to select either altimeter or Barometer use:  
ꢀ. In the function menu, scroll to Use with the arrow buttons and press Suunto.  
the alti/Baro field is activated.  
ꢁ. Change the content of the field with the arrow buttons and press Suunto. You then  
return to the function menu.  
 
33  
3.3.3. Altitude/Sealevel  
In order for the altimeter to function correctly you need to set the reference altitude.  
this means that you set an altitude reading that is equal to the real altitude. Set the  
reference altitude in a place where you know the altitude, for example, with the help of  
a topographical map. Suunto X6hr has a factory set reference altitude that corresponds  
to the standard barometric pressure (ꢀ0ꢀ3 hPa/ꢁ9.90inHg at sea level). If you do not  
know your current altitude no the correct sea level pressure, you can have an estimate  
of your altitude by setting the sea level pressure to ꢀ0ꢀ3hPa/ꢁ9.90inHg.  
In the Weather mode, altitude is replaced with Sealevel. this function is set in the  
same way as altitude.  
to set the reference altitude:  
ꢀ. In the function menu, scroll to Altitude with the arrow buttons and press Suunto.  
ꢁ. With the arrow buttons, set the reference altitude in the field to match the altitude of  
your current location and press Suunto. You return to the function menu.  
If you do not know your altitude, you can use the air pressure to help determine the  
altitude. to do this, select the Weather mode and set the current sea level air pressure.  
You can find out the sea level air pressure, for example, from the airport, weather station  
or Internet weather pages.  
3.3.4. Compass  
the compass menu includes functions for either calibrating the compass or setting  
its declination.  
Calibrating the compass  
You should calibrate the compass if it does not seem to work well, for example, when  
it displays the wrong compass bearing or the bearing changes too slowly. You should  
 
34  
also calibrate the compass after replacing the battery.  
Strong electromagnetic fields, such as electric lines, loudspeakers and magnets, can  
affect the compass calibration. therefore calibrate the compass if your Suunto X6hr  
has been exposed to these fields.  
You should also calibrate the compass before a long trip.  
NOTE: Calibrate the compass before using it for the first time.  
NOTE: Remember to hold Suunto X6hr level during the calibration.  
to calibrate the compass:  
ꢀ. In the function menu, scroll to Compass with the arrow buttons and press Suunto.  
ꢁ. In the compass menu, move to Calib with the arrow buttons and press Suunto.  
3. the screen displays the text rotate 360º” and begins a countdown from 5 to 0. When  
the countdown reaches 0, the calibration starts. Hold Suunto X6hr level and slowly  
rotate the device in a full clockwise or counterclockwise circle.  
• the level symbol indicates that calibration is in progress. the animation represents  
the progress of the calibration.  
• If the calibration succeeds, the message complete” is displayed and Suunto X6hr  
returns to the function menu.  
• If the calibration fails, the message try again” is displayed and the process starts  
again from the countdown. It is normal to have a successful calibration on second  
attempt.  
• If the calibration fails five times, the message failed, refer manual” is displayed  
and Suunto X6hr returns to the compass menu.  
If the calibration fails five times in a row, it is possible that you are in an area that has  
sources of magnetism, such as large metal objects, power lines, loudspeakers and  
electric motors. move to another location and try to calibrate the compass again.  
 
35  
You can also remove the battery and then insert it again. also make sure the compass  
remains level during calibrationotherwise the calibration may fail.  
If the calibration continues to fail, contact the authorized Suunto service.  
NOTE: The level symbol is not shown if the compass is calibrated when the heart rate  
monitor is active.  
Setting the compass declination  
You can compensate for the difference between true north and magnetic north by  
adjusting the compass declination. the declination can be found, for example, in the  
topographic maps of your local area.  
to set the compass declination:  
ꢀ. In the function menu, scroll to Compass with the arrow buttons and press Suunto.  
ꢁ. In the compass menu, move to Declin with the arrow buttons and press Suunto. the  
first row of the next window is activated.  
3. Select the correct option (off/east/West) with the arrow buttons and press Suunto.  
the degree field is activated.  
4. Set the degrees with the arrow buttons. the initial value is either 0.0° or the value  
accepted when last setting the declination.  
5. Press Suunto. You return to the compass menu.  
 
36  
3.4. WEATHER mODE  
3.4.1. main Display  
When you select the Weather mode, the main display opens. the main display has  
three rows.  
Temperature  
the first row displays the temperature in the selected unit. for more information about  
defining the temperature unit, refer to chapter 3.ꢁ.6.  
NOTE: Because the sensor is close to your wrist, you have to keep Suunto X6hr  
away from the body’s temperature at least for 15 minutes before the temperature  
measurement is accurate.  
Air pressure  
the second row displays the air pressure at sea level. for more information about  
defining the air pressure unit, refer to chapter 3.ꢁ.6.  
Shortcuts  
the third row contains shortcuts to three functions. to change the function, press  
Stop/CL.  
Trend: a graphical presentation of the air pressure development (sea level) during  
the last 6 hours in ꢀ5-minute intervals. one step on the vertical axis represents one  
hPa and one step on the horizontal axis represents ꢀ5 minutes.  
Absolute air pressure: the absolute air pressure is the actual pressure in the current  
location.  
Time: Displays the current time.  
 
37  
3.4.2. Use  
With the Use function you can define whether the air pressure measurement is used  
to define the altitude or to represent the weather conditions. for more information,  
refer to chapter 3.3.ꢁ.  
NOTE: For most Weather mode functions the correct Use setting is Baro.  
3.4.3. Sealevel  
With this function you can set the sea level barometric pressure. this is the barometric  
pressure at your current location reduced to sea level. Information on the current sea  
level pressure can be found newspapers, local news and radio weather reports, the  
local airport facility or in the Internet under local weather. for more information about  
the reference altitude, refer to chapter 3.3.3.  
to set the sea level pressure:  
ꢀ. In the function menu, scroll to Sealevel with the arrow buttons and press Suunto.  
ꢁ. With the arrow buttons, set the sea level pressure in the field to match the current  
sea level barometric pressure of you current location and press Suunto. You return  
to the function menu.  
3.4.4. Alarm  
When active, the weather alarm informs you if the air pressure drops more than  
4 hPa/0,ꢀꢀ8 inHg in 3 hours.  
NOTE: The weather alarm is activated only when the Use function is set to Baro.  
to activate or deactivate the weather alarm:  
ꢀ. In the function menu, scroll to Alarm with the arrow buttons. the current status of  
the alarm can be seen from the function menu.  
 
38  
ꢁ. Press Suunto. the on/off field is activated.  
3. Change the field to either on or off with the arrow buttons and press Suunto.  
When the weather alarm goes on, the alarm symbol  
flashes and the backlight  
switches on. to acknowledge the weather alarm, press any button.  
3.4.5. memory  
the memory automatically stores weather-related information from the last 48 hours.  
When you scroll through the stored information, it is presented in the following order:  
• maximum sea level air pressure during the measuring period, date and time.  
• minimum sea level air pressure during the measuring period, date and time.  
• maximum temperature during the measuring period, date and time.  
• minimum temperature during the measuring period, date and time.  
• Sea level air pressure and temperature in relation to the time and date starting from  
the current moment. the first 6 hours are displayed in ꢀ-hour intervals, the next  
4ꢁ hours in 3-hour intervals.  
NOTE: If the Use function has been set to Alti (altimeter), the barometric value stored  
in memory is always the same.  
to view the weather information stored in the memory:  
ꢀ. In the function menu, scroll to Memory with the arrow buttons and press Suunto.  
the first information page is displayed.  
ꢁ. Scroll the information with the arrow buttons—the up arrow scrolls forward and the  
down arrow backward.  
3. to stop viewing the memory content, press either Suunto or Stop/CL at any time.  
 
39  
3.5. HIkING mODE  
3.5.1. main Display  
When you select the Hiking mode, the main display opens. the main display has  
three rows.  
Ascent/descent rate  
the first row displays the ascent/descent rate in the selected unit. for more information  
about defining the ascent/descent rate unit, refer to chapter 3.ꢁ.6.  
Altitude  
the second row displays the altitude. for more information about defining the altitude  
unit, refer to chapter 3.ꢁ.6.  
Shortcuts  
the third row contains shortcuts to three functions. to change the function, press  
Stop/CL.  
Asc: the cumulative ascent since the logbook was started. If the logbook is not  
running, the display shows text asc 0”.  
Differ: When you select the Differ function, it displays the difference in altitude and  
time since the last reset of the function. to reset and start a new measurement, press  
Start. Differ is always in the measuring mode, i.e. it measures the time and altitude  
difference constantly but displays them only when you select the function.  
Both hours and minutes are displayed during the first ꢀ0 hours. During the next 89 hours,  
only hours are displayed. finally, the display shows only a dash and letter ‘h’.  
Time/Heart Rate: Displays the current time. If the heart rate monitor is receiving a  
heart rate signal, this row displays the heart rate instead of time.  
 
40  
3.5.2. Logbook  
the logbook allows you to save information regarding, for example, a hiking trip. When  
you start the logbook, it starts gathering information about the cumulative ascents and  
descents, average ascent and descent rates, highest and lowest points, heart rate and  
specific marks you can set during the trip. logbook information is updated in ꢀ0-second  
intervals. When you stop the logbook, the information gathered thus far is saved as  
a logbook file that can be viewed later. the maximum duration of one logbook is ꢀ68  
hours (one week). after this, the logbook stops automatically. Suunto X6hr can store  
ꢁ0 logbook files at one time. more logbooks can be saved on your PC with the help of  
the PC Interface. for more information, refer to chapter 4.ꢀ.  
NOTE: To record a complete graph of the activity, use the stopwatch in the Chrono  
mode.  
Starting the logbook  
to start the logbook:  
ꢀ. In the function menu, scroll to Logbook with the arrow buttons and press Suunto.  
ꢁ. Scroll to Start and press Suunto.  
If the logbook is not running and there is enough memory left, recording begins.  
the message logbook started” is displayed and you return to the function menu.  
If the logbook is already activated, the message logbook already running” is displayed.  
You return to the function menu, in which the Stop field is displayed in reversed  
color.  
If there is not enough memory left, the message memory full” is displayed and Suunto  
X6hr moves to a display that asks you to erase a logbook file. Suunto X6hr first  
suggests the oldest file.  
 
4ꢀ  
Select the logbook file to be deleted with the arrow buttons and press Suunto. the file  
is deleted from the memory and you return to the logbook menu.  
NOTE: Heart rate information is recorded only if the transmitter belt is active when the  
logbook is running.  
Stopping the logbook  
to stop the logbook:  
ꢀ. In the function menu, scroll to Logbook with the arrow buttons and press Suunto.  
ꢁ. Scroll to Stop and press Suunto. the saving stops and the message logbook stopped”  
is displayed. You automatically return to the function menu.  
If the logbook was not running when you tried to stop it, you return to the function  
menu.  
Viewing logbook files  
the logbook list includes the Hiking mode logs saved in the Suunto X6hr memory.  
You can scroll the list forward from the first item and either forward or backward from  
all the other items.  
to view the log files:  
ꢀ. In the function menu, scroll to Logbook with the arrow buttons and press Suunto.  
ꢁ. Scroll to View and press Suunto. a list of all the saved logbook files is displayed.  
3. Scroll the list with the arrow buttons until the logbook file you want to view is active  
and press Suunto. the first display is shown.  
4. Press the up arrow to move to the next display. the displays contain the following  
information:  
• Starting date and time, total time of the file and the number of runs. an ascent and  
consecutive descent of at least 50 meters is considered a run.  
 
4ꢁ  
total ascent and the average ascent rate  
total descent and the average descent rate  
• the highest point, date and time  
• the lowest point, date and time  
• average heart rate  
• the minimum and maximum heart rates  
• the marks the user has added to the logbook file include the altitude, heart rate,  
date and time of the mark. the maximum number of marks is ꢀ0.  
to return to the main display, press Suunto or Stop/CL for more than ꢁ seconds.  
NOTE: If you try to view the list but there are no saved logbook files, the message “no  
logbook files” is displayed and you return to the logbook menu.  
NOTE: If the heart rate monitor was not active during the logbook recording, the text  
“- -“ is visible on the heart rate displays.  
Erasing logbook files  
to erase a log file:  
ꢀ. In the function menu, scroll to Logbook with the arrow buttons and press Suunto.  
ꢁ. Scroll to Erase with the arrow buttons and press Suunto.  
3. a list of all the recorded logbook files is displayed. the oldest file is displayed in  
reversed color. Scroll the list with the arrow buttons until the logbook file you want  
to erase is active and press Suunto. the Suunto X6hr displays the file and the text  
erase?”  
4. If you want to accept the deletion, press Suunto. You return to the list of logbook  
files.  
5. If you want to cancel the deletion, press Stop/CL. You return to the logbook file list.  
 
43  
viewing logbook history  
the logbook history contains the cumulative values of ascents and descents and the  
highest point of all logbooks (Hiking and Chrono modes) recorded during the Suunto  
X6hr lifetime.  
to view the history:  
ꢀ. In the function menu, press Suunto to enter Logbook.  
ꢁ. Scroll to History and press Suunto.  
3. Press the up arrow to scroll the history information. the information is displayed in  
the following order:  
• Cumulative ascent.  
• Cumulative descent.  
• Highest point, date and year.  
Resetting the logbook history  
to reset the logbook history:  
ꢀ. Connect your Suunto X6hr to Suunto activity manager.  
ꢁ. Click Wristop  
History  
reset History. this will transfer the current history  
data to Sam database and set the history values in the Wristop computer memory  
to zero.  
Logbook marks  
You can add marks to the logbook file and save the information on the altitude of a  
specific point and time. this can only be done in Hiking mode. the maximum number  
of marks in each file is ꢀ0.  
adding a mark to the logbook file also records the heart rate of the same specific time  
if the heart rate monitor is active.  
 
44  
to add a mark, short press Start when the logbook is running. a long press activates  
the backlight and no logbook mark is made. the marks are added the logbook file and  
they can be viewed through the file list (refer to chapter 3.5.ꢁ.). When you have added  
the mark, the message mark point saved” is displayed.  
When you have saved the marks, the PC can create a profile that connects them with  
a line. With this feature you can, for example, create a simplified altitude profile of your  
trip. You can also use marks to compare the difference in time and altitude between two  
points of the trip. (Compare with the Differ function on chapter 3.5.ꢀ.)  
3.5.3. Use  
With the Use function you can define whether the air pressure measurement is used  
to set the altitude or to represent the weather conditions. for more information, refer  
to chapter 3.3.ꢁ.  
3.5.4. Altitude  
With this function you can set the reference altitude. for more information about the  
reference altitude, refer to chapter 3.3.3.  
3.5.5. Alarms  
the altitude alarm is intended to warn you if you pass the preset altitude limit.  
the ascent/descent alarm warns you if your ascent/descent rate is faster than the preset  
rate. When the alarm sounds, you can acknowledge it by pressing any button.  
NOTE: The alarms are functional only when the Use function is set to Alti.  
 
45  
Setting the altitude alarm  
to set the altitude alarm:  
ꢀ. In the function menu, scroll to Alarms with the arrow buttons and press Suunto. the  
alarm menu is displayed.  
ꢁ. Scroll to Altitude and press Suunto. the on/off field is activated.  
3. Change the status of the alarm to either on or off with the arrow buttons and press  
Suunto. the altitude field is activated.  
4. Change the altitude with the arrow buttons and press Suunto. You return to the  
function menu.  
Setting the ascent/descent alarm  
to set the ascent/descent alarm:  
ꢀ. In the function menu, scroll to Alarms with the arrow buttons and press Suunto. the  
alarm menu is displayed.  
ꢁ. Scroll to Asc/Dsc and press Suunto. the on/off field of the next display is  
activated.  
3. Change the status of the alarm to either on or off with the arrow buttons and press  
Suunto. the rate field is activated.  
4. Change the asc/dsc rate with the arrow buttons and press Suunto. You return to the  
main display.  
NOTE: The ascent is indicated by positive values, the descent by negative values.  
 
46  
3.6. CHRONO  
3.6.1. main Display  
When you select the Chrono mode, the main display opens. the main display has  
three rows.  
Altitude  
the first row displays the altitude in the selected unit. for more information about  
defining the altitude unit, refer to chapter 3.ꢁ.6.  
Stopwatch  
the second row displays the total time or split time. the split time is the time from the  
start of the timing to this moment. When you navigate to the main display, the time on  
the second row is either 0.00,0, the time of the previous timing, or, if the stopwatch has  
already started, a running time. the time starts running when you press Start.  
If you want to record a split and lap time, press Start again. the time on the middle  
row stops for 3 seconds to display the split time, displays the lap time for another  
3 seconds and then starts running again.  
When you want to stop the timing, press Stop/CL while in the Chrono mode. the stop  
time is then displayed on the second row. You can zero the display by long pressing  
Stop/CL.  
NOTE: If you want to continue the same timing after stopping it, press Start instead  
of zeroing the display.  
NOTE: You must have free space in the memory to be able to start the timing. If the  
memory is full, the message “memory full” is displayed and the Suunto X6hr suggests  
the oldest memory file to be erased. Erase the suggested file by pressing Suunto or  
 
47  
select and erase another file. After the deletion, you can start the chrono. For more  
information about erasing memory files, refer to chapter 3.6.2.  
Time/Heart Rate  
the third row displays the heart rate.  
If the heart rate monitor is not active, the third row displays the current time. When  
you enter the Chrono mode, the third row displays the time. If, however, Suunto X6hr  
receives a heart rate signal, the third row automatically switches to showing heart rate.  
If the reception of the heart rate signal is discontinued, “—-“ appears on the third row. If  
the signal is not received within 5 minutes, the third row starts showing the time again.  
to reactivate the heart rate display, switch to another mode and then return back to  
Chrono mode.  
3.6.2. memory  
the memory function records time and altitude data always when the stopwatch is active.  
Heart rate data is recorded only when the transmitter belt is active. the same memory  
file contains both altitude and heart rate data, but the data is viewed separately with  
View Alti and View HR. You can view the data simultaneously with the PC software.  
If the transmitter belt was not active when the recording began, no heart rate data is  
viewable in the memory file.  
viewing Heart Rate memory  
the memory file can be viewed in relation to heart rate data.  
to view a memory file:  
ꢀ. In the function menu, scroll to Memory with the arrow buttons and press Suunto.  
the memory menu is displayed with View HR in reversed color.  
 
48  
ꢁ. Press Suunto. the list of memory files is displayed. the files in the file list are  
organized so that the latest file is shown first.  
3. Scroll to the file you want to view with the arrow buttons and press Suunto. If the  
file does not contain heart rate data, the message no hr data” is displayed and you  
return to the file list.  
4. Scroll the information with the arrow buttons. the information is displayed in the  
following order:  
• the total duration of the file and the number of laps in the file.  
• average heart rate.  
• maximum and minimum heart rates.  
• Heart rate over the High limit. Shows the heart rate and time in minutes and  
seconds.  
• Heart rate under the Low limit. Shows the heart rate and time in minutes and  
seconds.  
• more specific information about the file, including the heart rates on individual  
points according to recording interval, and graphical presentations about the heart  
rate. these are displayed in the following way:  
first row:  
total elapsed time.  
Second row:  
• the left side displays a graphical presentation of heart rate in relation to time.  
the scale of the graphical presentation depends on the set recording interval.  
• the right side displays the average heart rate from the start of the recording to  
the time shown on the first row. for recorded lap times, the right side displays  
texts “lap” and “splitand the corresponding lap and split time numbers.  
 
49  
third row:  
• Heart rate displayed with the set recording interval (ꢁ,ꢀ0 or 60 seconds).  
NOTE: If heart rate has not been recorded, the value in the third row is 0.  
viewing the altitude memory  
the memory file can be viewed in relation to the time and altitude data.  
to view a memory file:  
ꢀ. In the function menu, scroll to Memory with the arrow buttons and press Suunto.  
the memory menu is displayed.  
ꢁ. Scroll to View Alti in the memory menu and press Suunto. the file list is displayed.  
3. Scroll to the file you want to view with the arrow buttons and press Suunto.  
4. Scroll the information with the arrow up button. the information is displayed in the  
following order:  
total duration of the file and the number of laps in the file.  
total ascent and the average ascent rate.  
total descent and the average descent rate.  
• Highest point, date and time.  
• lowest point, date and time.  
• more specific information on the file, including altitude and ascent and descent rates  
on individual points according to recording interval, and graphical presentations  
of the altitude. these are displayed in the following way:  
first row:  
total elapsed time.  
Second row:  
• the left side displays a graphical presentation of the altitude in relation to time.  
 
50  
the scale of the graphical presentation depends on the set recording interval  
and the recorded altitude differences.  
• the right side displays ascent and descent rates in the point of time displayed  
in the first row. for recorded lap times, the right side displays the texts “lap” and  
“splitand the corresponding lap and split time numbers.  
third row:  
• altitude displayed with the set recording interval (ꢁ, ꢀ0 or 60 seconds).  
NOTE: If you try to view a file when the file list is empty, the message “no files in memory”  
is displayed and you return to the Function menu.  
NOTE: When you start the Chrono, it starts recording the altitude profile. If the memory  
becomes full while the recording is on, Suunto X6hr stops recording the profile. However,  
the stopwatch remains running and the summary values are updated.  
Erasing memory files  
If the memory is full, you cannot start the timing until you have erased at least one  
memory file.  
to erase a memory file:  
ꢀ. In the function menu, scroll to Memory with the arrow buttons and press Suunto.  
the memory menu is displayed.  
ꢁ. Scroll to Erase and press Suunto. the list of memory files is displayed. the files in  
the file list are organized so that the latest file is shown first.  
3. Scroll to the file you want to erase with the arrow buttons and press Suunto.  
4. Scroll to Erase and press Suunto to erase the file. You return to the function  
menu.  
NOTE: If you try to erase a file when the file list is empty, the message “no files in  
memory” is displayed and you return to the Function menu.  
 
5ꢀ  
to quit erasing at any point, press Stop/CL to return to the function menu.  
Setting the recording interval  
the recording interval defines how often the information is saved to the memory when  
the timing is running. the recording interval is either ꢁ, ꢀ0 or 60 seconds. If you change  
the interval while the stopwatch is running, the change does not affect the current  
recording. the change applies to the next stopwatch recording.  
to set the interval:  
ꢀ. In the function menu, scroll to Memory with the arrow buttons and press Suunto.  
the memory menu is displayed.  
ꢁ. Scroll to Interval and press Suunto.  
3. Select the interval with the arrow buttons and press Suunto.  
the memory capacity is 4h ꢁ0 min with ꢁ s recording interval, ꢁꢁ h with ꢀ0 s interval  
and ꢀ33 h with 60 s interval. these values are approximate, depending on how many  
lap times you record in the memory. When you select the recording interval, the exact  
free memory capacity is displayed on the bottom row of the Interval menu of the  
memory function.  
3.6.3. Altitude  
With this function you can set the reference altitude. for more information about the  
reference altitude, refer to chapter 3.3.3.  
3.6.4. Use Alti/Baro  
With the Use function you can define whether the air pressure measurement is used to  
represent the altitude or the weather conditions. When the Chrono is on, it is advisable  
to activate the alti use. for more information, refer to chapter 3.3.ꢁ.  
 
5ꢁ  
3.6.5. Timer  
You can activate the timer to sound a signal after set periods. It can be used, for  
example, for interval training. two different intervals, Int1 and Int2, can be set.  
the timer is synchronized with the stopwatch, and if turned on, it signals when the  
stopwatch is running. If two intervals have been set, they will signal consecutively,  
interval ꢀ with one long beep and interval ꢁ with two shorter beeps.  
NOTE: You do not have to acknowledge the signal in any way when you hear it.  
Activating the timer  
to activate the timer:  
ꢀ. In the function menu, scroll to Timer with the arrow buttons and press Suunto.  
the On/Off selection is activated.  
ꢁ. Set the timer on with the arrow buttons and press Suunto. a long press brings you  
back to the main window if the interval is already correct. a short press activates the  
Int1 minutes field.  
3. Set the minutes with the arrow buttons and press Suunto. the seconds field is  
activated.  
4. Set the seconds with the arrow buttons and press Suunto. the Int2 minute field  
is activated. If you leave the Int2 field to show zero, the timer signals only the Int1  
interval.  
5. Set the minutes with the arrow buttons and press Suunto. the seconds field is  
activated.  
6. Set the seconds with the arrow buttons and press Suunto. the timer is now set.  
7. the timer starts when you start the stopwatch with Start. You can also start the timer  
when stopwatch is running. then the Int1 starts from the moment when you set the  
timer status from off to on and confirm it by pressing Suunto.  
 
53  
Note: If you change the intervals when the timer is active, the new interval times become  
effective after the ongoing interval has ended.  
A stopping the timer  
to stop the timer without stopping the stopwatch:  
ꢀ. In the function menu, scroll to Timer with the arrow buttons and press Suunto.  
the timer menu is displayed, and if the timer is active, the on field is displayed in  
reversed color.  
ꢁ. Change the setting to off with the arrow buttons and press Suunto. the timer is now  
inactivated and will not sound signals when the stopwatch is running.  
3.6.6. HR Limits  
You can set limits to the heart rate monitor. When the heart rate is above the set High  
limit or below the set Low limit, Suunto X6hr gives an alarm signal. the Hr limits can  
be activated and deactivated with a long press of Suunto in any of the main mode  
windows. the low limit signal is a beep on every third heart beat. the High limit signal  
is a series of four beeps in the rhythm of the heart rate, followed by a pause on the  
fifth heart beat.  
Setting the Heart Rate limits  
to set the heart rate limits:  
ꢀ. In the function menu, scroll to HR Limits with the arrow buttons and press Suunto.  
the Hr limits menu is displayed.  
ꢁ. Set the HR Limits function on with the arrow buttons and press Suunto.  
3. Set the High heart rate limit with the arrow buttons and press Suunto.  
4. Set the Low heart rate limit with the arrow buttons and press Suunto. You return to  
the function menu and the heart rate limit has been set. the alarm symbol  
is  
activated on the display.  
 
54  
NOTE: The maximum High rate is 230 and the minimum Low rate is 30. The High rate  
cannot be set to lower than the Low rate and vice versa. If the High rate is scrolled  
above 230, it continues from the Low rate upwards.  
5. to set HR limits on or off during training, long press Suunto button in the main  
display of any of the modes. this changes the status of the HR Limits from on to  
off and vice versa.  
4. ADDITIONAL FEATURES  
4.1. PC INTERFACE  
With the PC Interface you can transfer and store the logs you have recorded with your  
Suunto X6hr to your PC. the logs can be either Hiking logs stored in the Suunto X6hr  
logbook files, weather logs stored in the weather memory or Chrono logs stored in the  
chrono memory. When the data has been transferred, you can organize, view and add  
related information to it with the Suunto activity manager software.  
the PC Interface cable and Suuntoactivity manager are delivered in the same package  
with your Suunto X6hr. the installation instructions for the software can be found on  
the cover of the Suunto activity manager CD-rom.  
You can always download the latest update of Suunto activity manager in www.suunto.  
com.  
4.1.1. Transferring data  
attach the cable to the serial port of your PC. make sure that the port is not used by  
other programs. You can also use a USB port with a serial/USB adapter.  
open Suunto activity manager (Sam) and connect the cable to your Suunto X6hr.  
 
55  
Suunto X6hr goes automatically into data  
transfer mode. this is indicated by the text serial  
transferon the Suunto X6hr display. Click on  
the “Wristop” icon in the upper left corner of  
Sam to open the data transfer window. Press  
the “Connect” button in the lower part of the  
window to transfer the list of log files from the  
wristop computer to the Sam window. When you  
drag and drop the logs into appropriate folders,  
they are saved to the hard disk of your PC. the  
folders are located on the left side of the Sam  
data transfer window. When you have uploaded  
the logs, you can delete them from the Suunto  
X6hr memory by dragging them to the recycle  
bin in the lower left corner of Suunto activity  
manager to create more space for new logs.  
for further information, see the Suunto activity  
manager Help. to access the Help, click the help  
icon on the upper right corner of the display. You  
can also refer to the Sam tutorial for step-by-  
step instructions. to access the tutorial, click  
the tutorial link in the Help Contents window in  
the Sam Help.  
 
56  
4.1.2. Suunto Activity manager Features  
Users  
You can create a user profile and add information about yourself and your Suunto X6hr.  
Creating user information is useful if you have several wristop computers you want to  
use with the same PC, or when many people use the same wristop computer.  
Logs  
When you have uploaded the logs from the Suunto X6hr, you can organize them with  
Suunto activity manager. You can, for example, create folders in which you can store  
the logs—the hiking logs can be arranged in a different folder than the skiing logs. You  
can also sort the logs, move them between folders and delete them or search the log  
information. It is even possible to upload them to the SuuntoSports.com site.  
Charts and Data  
You can examine the log information by creating charts from it. the charts show the  
altitude profile and/or heart rate. open the folders and select the logs you want to  
see. Click on the “open log” button to view the file as a chart. If you have opened  
several logs, they are listed in the window below the chart. there you can select which  
profiles you want to view simultaneously. You can also add bookmarks to a chart. the  
bookmark can either be a text or an image - for example a photograph of the highest  
peak of your trek.  
You can also view the log information as a data list where the altitude and heart rate  
values are listed in chronological order. to view the data list, click on the “Data” button  
on the upper part of the chart window. Both the charts and the list can be printed.  
NOTE: You can correct the error values of Heart rate on the Data page by writing the  
correct value into the Heart rate field, and delete selected data samples by clicking  
Ctrl + Del.  
 
57  
Analyzing Data  
You can analyze the data in the logs according to your activities and different time  
periods. Select the files you want to analyze from the folder and click on “open logs”.  
then press “analyze”. the analysis displays information on altitude zones, duration  
and heart rate zones. the analysis results are displayed as 3-D bar diagrams that you  
can rotate on the screen.  
Changing Suunto X6hr Settings  
You can change some Suunto X6hr settings with the Wristop Computer section of  
Suunto activity manager. You can change the following settings:  
• asc/Dsc—select the used ascent/descent unit (m/s, m/min, m/h, ft/s, ft/min, ft/h).  
• altitude—change the used altitude unit (m or ft).  
• Pressure—select the used pressure unit (hPa or inHg).  
temperature—select the used temperature unit (°f or °C).  
• time—select between ꢀꢁ- or ꢁ4-hour display.  
• Date—select the date format (day/month, month/day, day).  
• light—select the light setting (normal, nightUse, off).  
tones—set the buttons on or off.  
• Icons—set the mode icons on or off.  
the current settings are shown in yellow. to change them, click the desired settings  
with your mouse and then click “Update settings” in the lower right corner of Sam when  
your Suunto X6hr is connected to PC.  
 
58  
4.2. SUUNTOSPORTS.COm  
SuuntoSports.com is an international free web community where you can refine and  
share the data that you have recorded with your personal Suunto instrument and  
analyzed with the sport specific PC interface. SuuntoSports.com offers you a number  
of features that help you get more out of your sport and your Suunto X6hr.  
If you already own a personal Suunto sports instrument you can access all sport-specific  
functions through registration. If you do not yet have an instrument you may either log  
on as a guest or register yourself. as a guest you can view and read, but registration  
gives you the right to use other functions and participate in discussions.  
4.2.1. System Requirements  
SuuntoSports.com has the following system requirements:  
• Internet Connection  
• Browser: Ie 4.0 or newer, netscape 4.7x or newer  
• resolution: minimum 800 x 600, best viewed with ꢀ0ꢁ4 x 768  
4.2.2. SuuntoSports.com Sections  
SuuntoSports.com includes three sections all of which have several functions. the  
following paragraphs describe only the basic functions of SuuntoSports.com. You  
can find detailed descriptions of all the site functions and activities and step-by-step  
instructions for using them in the site Help. the Help is available on each page and its  
icon is located on the right side of the bar that divides the screen. the Help is frequently  
updated as the site develops.  
SuuntoSports.com offers several possibilities for searching the information on the site.  
In addition to the free search, you can search, for example, for groups, users, locations,  
logs and sports.  
 
59  
the information published on the SuuntoSports.com contains internal links so that you  
do not always have to search for the information from the very beginning. for example,  
if you view a description of a location, you can follow the links and view the location  
information, the sender’s personal information, the logs related to the location and the  
charts created from the logs if the sender has made this information public.  
my Suunto  
this section is meant for your personal information. You can store information about  
yourself, your wristop computer, your sports and training activities, etc. When you upload  
your personal logs to SuuntoSports.com with the Suunto activity manager, they are  
displayed in your personal information and no other user can see them. Here you can  
also manage them and decide whether they are presented to all community users or  
to limited groups or whether they are kept for your personal use only.  
When you have uploaded logs to SuuntoSports.com, you can create charts from the  
altitude and heart rate data in the logs and attach them to your training locations and  
activities. You can also publish your logs and compare them with other users’ logs. You  
can also publish travel reports, which can include text, images and log files.  
Communities  
In the Communities section, you can form or search groups and manage your own  
groups. for example, you can create a group for all your sports friends, and share  
information about each other’s results, give advice and discuss, where and when you  
could go training together. Groups can be either open or closed. Closed groups mean  
that you have to apply for a membership and be accepted before you can participate  
in group activities.  
all groups have a home page that displays information about group events and includes  
 
60  
news, notice board and other information. Group members can also use group-specific  
bulletin boards, chat rooms and group calendars, and add links and create group  
activities.  
Sport Forums  
SuuntoSports.com has its own Sport forum with pages for each Suunto sport.  
the basic features and functions are the same for all sports pages—sport-specific  
news, bulletin boards and discussions. Users can also suggest links to sports-related  
sites and tips regarding the sport and equipment to be published on the site, or publish  
their own travel reports.  
Sport forums include presentations of sports-related locations. Users can rank the  
locations and comment on them, and the results are published next to the location  
information. You can also create ranking lists for other things—for example, which group  
has most members, who has uploaded most logs or collected the biggest verticals,  
visited the highest places, and so on.  
4.2.3. Getting Started  
to join the SuuntoSports.com community, connect to the Internet, open your web  
browser and go to www.suuntosports.com. When the opening page appears, click the  
Register icon and register yourself and your Suunto sports instrument. You can change  
and update your personal and equipment profiles later in my Suunto section.  
after the registration, you will receive your password by e-mail. Using this password  
you can enter the SuuntoSports.com home page that introduces the site structure and  
functional principles. You can later change the password in the my Suunto section.  
NOTE: SuuntoSports.com is continuously developed further and its content is subject  
to change.  
 
6ꢀ  
5. TECHNICAL DATA  
General  
• operating temperature -ꢁ0 °C to +50 °C/-5°f to ꢀꢁ0°f  
• Storage temperature -30 °C to +60 °C/-ꢁꢁ°f to ꢀ40°f  
• Weight 54 g (X6hr), 96 g (X6hrm), 89 g (X6hrt)  
• Water resistant ꢀ00 m/330 ft (according to ISo ꢁꢁ8ꢀ standard)  
• mineral crystal glass (X6hr, X6hrm), Sapphire glass (X6hrt)  
• User-replaceable battery Crꢁ03ꢁ  
• PC interface with serial connector  
• Housing material: Composite (X6hr), Stainless Steel (X6hrm), titanium (X6hrt)  
• Strap material: elastomer (X6hr, X6hrm), titanium/elastomer (X6hrt)  
• extension strap (available as accessory for the model X6hr)  
Altimeter  
• Display range –500 m to 9000 m / -ꢀ600 ft to ꢁ9500 ft  
• resolution m / 3 ft  
Barometer  
• Display range 300 to ꢀꢀ00 hPa / 8.90 to 3ꢁ.40 inHg  
• resolution ꢀ hPa / 0.05 inHg  
Thermometer  
• Display range -ꢁ0°C to 60°C / -5°f to ꢀ40°f  
• resolution ꢀ°C / ꢀ°f  
Compass  
• resolution ꢀ°  
 
6ꢁ  
Transmitter Belt  
• Weight 59 g  
• User-replaceable battery Crꢁ03ꢁ  
• Water resistant ꢁ0 m/66ft  
• modulation frequency ca. 5 kHz  
6. COPYRIGHT AND TRADEmARk NOTICE  
this publication and its contents are proprietary to Suunto oy and are intended solely  
for the use of its clients to obtain knowledge and key information regarding the operation  
of Suunto X6hr products.  
Its contents shall not be used or distributed for any other purpose and/or otherwise  
communicated, disclosed or reproduced without the prior written consent of Suunto  
oy.  
Suunto, Suunto X6hr, Suunto X6hrm, Suunto X6hrt and their logos are all registered  
or unregistered trademarks of Suunto oy. all rights are reserved.  
While we have taken great care to ensure that information contained in this documentation  
is both comprehensive and accurate, no warranty of accuracy is expressed or implied.  
Its content is subject to change at any time without notice. the newest version of this  
documentation can always be downloaded in www.suunto.com.  
 
63  
7. CE  
the Ce mark is used to mark conformity with the european Union emC directive  
89/336/eeC.  
8. LImITS OF LIABILITY AND ISO 9001 COmPLIANCE  
If this product should fail due to defects in materials or workmanship, Suunto oy will,  
at its sole option, repair or replace it with new or rebuilt parts, free of charge, for two  
(ꢁ) years from the date of its purchase. this warranty is extended only to the original  
purchaser and only covers failures due to defects in materials and workmanship that  
occur during normal use while in the period of the warranty.  
It does not cover battery replacement, damage or failures resulting in accident, misuse,  
neglect, mishandling, alteration or modifications of the product, or any failure caused  
by operation of the product outside the scope of its published specifications, or any  
causes not covered by this warranty.  
there are no express warranties except as listed above. the client can exercise the right  
to repair under the warranty by contacting Suunto oy’s Customer Service department  
to obtain a repair authorization.  
Suunto oy and its subsidiaries shall in no event be liable for any incidental or  
consequential damages arising from the use of or inability to use the product. Suunto  
oy and its subsidiaries do not assume any responsibility for losses or claims by third  
parties that may arise through the use of this device.  
Suunto’s Quality assurance System is certified by Det norske veritas to be ISo 900ꢀ  
compliant in all SUUnto oy’s operations (Quality Certificate no. 96-Hel-aQ-ꢁꢁ0).  
 
64  
9. DISPOSAL OF THE DEvICE  
Please dispose of the device in an appropriate way, treating it as  
electronic waste. Do not throw it in the garbage. If you wish, you may  
return the device to your nearest Suunto representative.  
 
65  
CUSTOMER SERVICE CONTACTS  
Global Help Desk +358 2 284 11 60  
Suunto USA Phone +1 (800) 543-9124  
Canada Phone  
Suunto website  
+1 (800) 776-7770  
COPYRIGHT  
This publication and its contents are proprietary to Suunto Oy.  
Suunto, Wristop Computer, Suunto X6HR and their logos are registered or  
unregistered trademarks of Suunto Oy. All rights reserved.  
While we have taken great care to ensure that information contained in this  
documentation is both comprehensive and accurate, no warranty of accuracy is  
expressed or implied. Its content is subject to change at any time without notice.  
 
Suunto Oy 10/2004, 11/2005, 3/2007  
 

Sharp Stereo System XL 1200 User Manual
Shure Headphones PGA58 User Manual
Singer Sewing Machine 116 1 User Manual
Sony Car Stereo System SRF 18 User Manual
Sony DJ Equipment SDP EP70 User Manual
Sony Home Theater System DAVX10 User Manual
Sony Portable Speaker SS LAP305ED User Manual
Sony Universal Remote DAV FR1 User Manual
Sylvania DVD Player DVL100CB User Manual
Sylvania DVD VCR Combo DVR91VG User Manual